Jobs
Job details
Jobs are saved to your account online, so they appear on any phone or computer where you log in. Back up all jobs keeps an extra copy as a file.
Photos
Add a picture of the cabinet the customer wants, or of the wall or space you measured. Tap Draw sizes to write measurements on top of it.
🗑️ Recycle bin 0
Deleted jobs wait here for 30 days. Recover brings a job back; Delete forever removes it for good.
Units & pieces
Add a unit, type its size, and the panels, drawings and cut list are made for you. Change any size and everything updates.
Extra panels
Any other piece: tops, fillers, plinths, skirting… Sizes in mm. Grain = can’t be turned on the sheet.
All panels in this job
Room layout
Drag a cabinet or piece of furniture to move it. Drag the empty floor or walls to turn the room (up or down to look from higher or lower).
Room size
Floor plan (from above)
Units in the room
Units come from the Design tab. Choose the wall, how far from the corner, and the height off the floor (for wall cabinets).
Furniture
Fill the room so the customer can picture it. Drag furniture in the 3D picture or on the floor plan to move it, or type where it goes.
Kitchen extras
Worktop goes on top of base cabinets and drawer units. Add a sink, hob, cooker or fridge from Furniture.
Doors & windows
Cut list & sheets
Cut list
Cost & quote
Materials (from the cut list)
Hardware & other items
Labour & totals
Sketch pad
Saved with this job automatically.Size line: drag to draw a line with arrows, then type the size (for example 900). Text: tap where you want the words. Photo: put a picture under the drawing, then draw sizes on top. Auto sketch: turns the photo into a clean line drawing. Colour sketch: the same, with soft colours from the photo.
Tools
Count plywood with the camera
Photograph the edge of the stack, straight on, in good light. Then drag a line across the sheets from the top sheet to the bottom sheet. Tap on the line to add or remove a mark if one is wrong.
Count by stack height
Measure the stack from floor to top with your tape.
Saved counts
Measure on a photo
1. Put something of known size flat against the wall or cabinet (an A4 sheet, or your tape pulled out to 1000 mm). 2. Drag a line along it and enter its length. 3. Drag lines on anything else to measure it. Stand straight in front; things nearer or further away won't be accurate.
Tape reading
Type any measurement: 1250, 125 cm, 48 3/8", 4' 2 1/2", 2.4 m.
Calculator
Equal spacing
Shelves, slats or legs spread evenly inside a space.
Site measurements
Write down measurements at the customer's place. They are saved with this job.
Your business
Your name, logo, phone and address appear on quotes, printouts and the customer quote page.
🤖 AI photo reader
Lets Make unit from photo read what the unit is: type, doors, drawers, shelves and real proportions. You still type one real size. Included in your subscription.
…
Photos are sent for reading only when you press Read with AI.
Cutting
Boards (sheet materials)
Scanned boards (photos)
Take a photo of the plywood or board your customer chose, using 📷 Scan board on a unit in Design. The 3D view and drawings then show that wood.